DFI EC300 Series - Manual (Page 88)

88
5
Ports and Connectors
DVI Port
The DVI-I port is used to connect an LCD monitor.
Connect the display device’s cable connector to the DVI-I port. After you plug the
cable connector into the port, gently tighten the cable screws to hold the connec-
tor in place.
BIOS Setting
Confi gure the display device in the Chipset menu (“North Bridge Confi guration”
submenu) of the BIOS. Refer to chapter 7 for more information.
Driver Installation
Install the graphics driver. Refer to chapter 4 for more information.