DFI EC300 Series - Manual (Page 109)

109
5
Ports and Connectors
VGA
PS/2 Keyboard/Mouse Connector
10 9
1 2
KB CLK
GND
NC
MS CLK
MS DATA
CHASSIS GND
GND
+5V_STB
KB DATA
+5V_STB
The PS/2 Keyboard/Mouse connector is used to connect PS/2 keyboard and PS/2
mouse by means of a PS/2 cable.
Wake-On-PS/2 Keyboard/Mouse
The Wake-On-PS/2 Keyboard/Mouse function allows you to use the PS/2 key-
board or PS/2 mouse to power-on the system. To use this function:
• Jumper Setting
JP1 must be set to “2-3 On: +5V_standby”. Refer to “PS/2 Power Select” in
chapter 4 for more information.
Important:
The +5V_standby power source of your power supply must support
≥720mA.