DFI EC700-BT Manual - Manual (Page 40)

www.dfi .com
40
Chapter 7 BIOS Setup
Chapter 7
HW Monitor
This section is used to monitor the hardware status.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
PC Health Status
Case Open
System Temperature
CPU Temperature
VCORE
5V
3.3V
Advanced
[Disabled]
: +35 C
: +34 C
: +0.944 V
: +5.077 V
: +3.339 V
Case Open Function
 Select Screen
 Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F4: Save & Reset
ESC: Exit
Case Open
Set this field to Enabled to allow the system to alert you of a chassis intrusion event.
CPU Configuration
This section is used to configure the CPU. It will also display the detected CPU information.
Number of cores to enable
in each processor package.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
Advanced
Active Processor Cores
Number of cores to enable in each processor package.
Intel Virtualization Technology
When this field is set to Enabled, the VMM can utilize the additional hardware capabili-
ties provided by Vanderpool Technology.
EIST
This field is used to enable or disable the Intel Enhanced SpeedStep Technology.
 Select Screen
 Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F4: Save & Reset
ESC: Exit
CPU Confi guration
Intel(R) Atom(TM) CPU E3845 @ 1.99GHz
CPU Signature
Microcode Patch
CPU Speed
64-bit
Processor Cores
Intel VT-x Technology
L1 Data Cache
L1 Code Cache
L2 Cache
Active Processor Cores
Intel Virtualization Technology
EIST
30679
902
1918 MHz
Supported
4
Supported
24 KB x4
32 KB x4
1024 KB x2
[All]
[Enabled]
[Disabled]