DFI EC700-BT Manual - Manual (Page 25)

25
Chapter 5 Ports and Connectors
Chapter 5
www.dfi .com
9~36V DC-in
3
This jack provides maximum of 120W power and is considered a low power solution. Connect
a DC power cord to this jack. Use a power adapter within 9~36V DC output voltage. (We only
provide 19V DC output in the package contents.) Using a voltage out of the range 9~36V may
fail to boot the system or cause damage to the system board.
DC-in
RJ45 LAN Ports
LAN 1
LAN 2
Features
• 2 Intel ® I210 PCI Express Gigabit Ethernet controllers
The LAN ports allow the system board to connect to a local area network by means of a
network hub.
BIOS Setting
Configure the onboard LAN in the Chipset menu (“South Bridge Configuration” submenu) of
the BIOS. Refer to chapter 7 for more information.
Driver Installation
Install the LAN drivers. Refer to chapter 8 for more information.
3