DFI EC700-BT Manual - Manual (Page 15)

www.dfi .com
15
Chapter 3 Installing Devices
Chapter 3
3. Grasping the mSATA card by its edges, align the card into the slot at an approximately 30
degrees angle. Apply fi rm even pressure to each end of the card until it slips down into the
slot. The contact fi ngers on the edge of the card will almost completely disappear inside the
slot.
4. Push the mSATA card down and use the provided mounting screws to secure the card on the
system board.
Mounting Screw
mSATA Card
1. Locate the mSATA slot on the system board.
2. The system board is equipped with a mSATA slot. The mSATA slot supports full length mSATA
card. Note the key on the slot. The key ensures the mSATA card can be plugged into the slot in
only one direction.
Installing the mSATA Card
Full length
mSATA