DFI KS200 Manual - Manual (Page 8)

www.dfi .com
8
Chapter 1 Introduction
I/O Ports • Front
- 1 Power LED
• Top
- 1 SD/MMC card socket
• Bottom
- 12-bit GPIO (2 7-pole terminal blocks)
- 1 Line-out
- 1 DB-9 RS232 COM
- 1 RJ45 10/100Mbps LAN with LEDs
- 2 USB 2.0 (Type A)
- 1 DB-9 RS232/422/485 COM
- 1 DC-in (2-pole terminal block)
- 1 power switch
Front Panel
Protection • IP65 (Dust Tight; Water Proof protection)
Construction • Aluminum front bezel, Rugged metal housing
Mounting • Wall mount (VESA 75x75)
• Panel mount (Mounting clamp)
Dimensions • 235mm x 150mm x 40.8mm (W x H x D)
Weight • 2.10 kg
OS Support • Windows CE 6.0
Certifi cation • CE
• FCC Class B
• RoHS
• UL
• Compliant with IEC 60945 (Protected B)
Specifications
KS200
Processor System
• TI ® AM3517 Sitara ARM Cortex-A8
Memory • 512MB DDR2 onboard
- 4 DDR2 64Mx16 RAM
LCD and
Touch Screen
• 7” (800x480) WVGA TFT touch screen LCD
• Supports touch screen
- TI ® TSC2004 touch screen controller
• 400 NITS
• 4-Wire Resistive type
Storage • 1 SD/MMC card socket
• 512MB NAND Flash
- Samsung K9F4G08U0D fl ash memory 512Mx 8bit (512MB)
Ethernet
• LAN8710 10/100Mbps LAN chip
• 1 LAN port
• Supports 10BASE-T and 100BASE-T
Audio • 1 Line-out
COM • 1 RS232/422/485 COM port
• 1 RS232 COM port
USB • 1 TUSB1210 USB transceiver
• 2 Type A USB 2.0/1.1 ports
GPIO • 12-bit GPIO connector
Power • Power input voltage
- 9~30V DC-in
Environment • Temperature
- Operating: -20 o C ~ 65 o C (The power adapter only supports -20 o C ~ 40 o C)
- Storage: -30 o C ~ 80 o C
• Relative Humidity
- 95% RH at 65 o C, 1 week
• Corrosion
- 4 periods of 7 days at 65 o C with 90-95% relative humidity after 2 hours salt
spray or waiver
Chapter 1