Chapter 3 - installing devices, Installing the sata drive, Chapter 3 chapter 3 - installing the device – DFI ES520-CD Manual User Manual
Page 11
www.dfi .com
11
Chapter 3 Installing the Device
Chapter 3
Chapter 3 - Installing the Device
Installing the SATA Drive
1. Remove the 4 mounting screws to open the cover on the bottom of the system.
2. Fasten the 4 mounting screws that secure the HDD brackets fi rmly to the system cover.
Mounting screw
Mounting screw
HDD bracket
3. Align the mounting holes of the SATA drive with the mounting holes on the HDD brackets and
then use the provided mounting screws to secure the drive in place.
Mounting screw
Mounting screw
SATA drive
HDD bracket
This manual is related to the following products: