Dexaplan GA 607 User Manual

Page 7

Before connecting a 12 V DC mains
adapter to the mains, make sure that the
mains current is 230 V ~ 50 Hz and
equipped with a max. 16 amp fuse in
accordance with requirements.

• This device does not serve as primary

explosion protection as deﬁ ned by the
guidelines of the employer’s liability insur-
ance associations.

• Do not cover the device with any object.

This could diminish the performance of
the sensor.

• Make sure that the device does not come

into contact with moisture.

• Protect the device from strong magnetic

or electric ﬁ elds.

• Protect the device from heavy mechanical

strain and shocks.

• Only use the device with the supplied

original parts or parts that are designed
for it.

• Check before initial operation that all

components are assembled in accord-
ance with the operating instructions.

• Before assembly and initial operation of

the device, check that the delivery is
complete and undamaged.

• The device must only be repaired by

authorized and skilled specialists. Failure
to observe this instruction risks damage

resulting from improper use and loss of
the warranty.

• Position the device so that the sensors

can detect escaping gas.

• Use the device at normal room tempera-

tures only. Higher or lower temperatures
can diminish performance.

• Do not open the device. Opening the

device will lead to expiry of the warranty.

• For connection in cars, caravans or on

boats, ﬁ t the (12 V DC) power supply
cable with a switch approved for this pur-
pose. Switch the gas alarm off when the
gas supply is switched off. This saves
electricity, since the gas alarm otherwise
constantly uses electricity.

• Connect the 12 V DC terminal screws

ቩ

either to the mains adapter supplied with
the gas alarm or a 12 V DC power supply
source in cars, caravans and boats. Dual
connection (parallel connection) will dam-
age the mains adapter.

• For connection to the 12 V DC battery, ﬁ t

the 12 V DC connecting cable with a fuse
(250 mA).

• Remove the “IMPORTANT INFORMATION”

page from the operating instructions and
hang it on the wall in a visible position
directly next to the gas alarm.

IB_GA607_UK_IRL_Content.indd 9

20.09.2005 13:59:53 Uhr