Dexaplan GA 607 User Manual

Page 5

ቨ

Mounting

ﬁ

xture

ቩ

12 V DC terminal screws

ቪ

Cable

guide

ቫ

Side and lower sensor openings

Technical data

Gas alarm:
Power supply:

12 Volt DC (±10%)
mains adapter (deliv-
ered with the gas
alarm) or on-board
power supply system

Current consumption: max. 150 mA
Gas sensor:

hot-wire method

Sensitivity/alarm
threshold:

corresponds to a con-
centration of 5 % of
the relevant lower
explosive limit

Propane:

0.11 %

Butane:

0.09 %

Methane
(town gas/natural gas): 0.25 %
Alarm signal:

loud high-frequency
tone

Volume:

85 dB(A) 3m

Operating temperature: -10 °C to +50 °C
Relative air humidity: max. 95 %
Material:

ABS plastic

Dimensions:

35 x 85 x 85 m (h x w x l)

Weight:

approx. 100 g

Protection class:

III

Mains adapter (delivered with the gas
alarm):
Power supply:

230 V ~ 50 HZ

Current consumption:

max. 9 W

Current output:

12 Volt DC
max. 300 mA

Connecting cable length: approx. 2 m

Safety instructions

The following instructions are for your own
safety and satisfaction when operating the GA
607 gas alarm. Please note that non-compli-
ance with these safety instructions can lead to
a serious risk of accident.

Explanation of the symbols and terms
used:

Ꮨ

Danger! Failure to observe this instruc-

tion endangers life and health.

Caution! Failure to observe this instruc-

tion poses a risk to property.

Ꮨ

Danger!

• Do not leave small children unsupervised

with the packaging material. Danger of
suffocation.

IB_GA607_UK_IRL_Content.indd 7

20.09.2005 13:59:52 Uhr