Devolo dLAN Wireless extender - Manual (Page 31)

devolo
®
dLAN
®
Wireless extender
31 Configuration
The password can also be entered manually under Overview X Change
Configuration X dLAN Settings . Enter the desired password in each of
the two input fields and click Save.
3.5 Management
Use the Management section to reset your current configuration to factory
defaults, save the configuration as a file on your computer or restore such a
file to the device, or update the firmware of the dLAN ® Wireless extender.
3.5.1 Reset configuration
Use Overview X Management X Reset Configuration to reset your
dLAN ® Wireless extender to its factory defaults. Your personal settings will be
discarded during the reset. The most recently assigned dLAN ® password for
the dLAN ® Wireless extender adapter will be retained, however, and will not
be reset to the default password "HomePlug".
You can also change the dLAN ® password by using the dLAN Configuration
Wizard in the Windows ® Start X Programs X devolo program group or
via the integrated configuration interface of the adapter in the Overview
X Change Configuration X dLAN Settings section.
To restore your settings after a reset, save them in a file on your computer
and reload them (see following section).