Devolo dLAN duo - Manual (Page 18)

devolo dLAN software
|
| devolo dLAN duo |
18
4.1.4 EasyClean
Microsoft Internet Explorer stores files in a cache on your hard drive while you
surf the Internet. With EasyClean, you can determine which of these unwanted
files you would like to delete.
4.2 Installing the devolo dLAN software
ቢ Put the enclosed devolo product CD in your CD-ROM drive.
ባ From the CD setup, select 'Install dLAN software'. Windows starts the wiz-
ard. Confirm by clicking Next.
ቤ Select 'Standard Installation' to install the complete devolo dLAN Software
package. Then, click Next.
If you would like to choose the software components to be installed yourself,
select 'Custom Installation'. Then, click
Next .
ብ Terminate the installation by clicking Finish.
ቦ After the installation has been completed successfully, start the devolo tools
by clicking Start
̈
Programs
̈
devolo
̈
dLAN configuration wiz-
ard , EasyShare, Informer or EasyClean.
4.3 Configuration of the dLAN network using the
dLAN configuration wizard
Please have the previously noted dLAN adapters security IDs ready. The dLAN
configuration wizard requires them for configuration of the network. You will
find the security ID on the bottom of the device.
ቢ Start the dLAN configuration wizard under Start ̈ Programs ̈ devolo
̈
dLAN configuration wizard.
ባ Confirm with Next. The dLAN configuration wizard starts the network anal-
ysis and searches for dLAN adapters on your network.
Make sure that all of the dLAN adapters that you want to add to your network
are also connected to the power supply grid. If no active device is connected to
the Ethernet or USB port, a dLAN adapter will go into standby mode after about
15 minutes. It cannot be configured while in standby mode.