Devolo MicroLink 56k Fun LAN - Manual (Page 9)

|
Connection and Startup 9
| devolo MicroLink 56k Fun LAN |
EN
b
ETH: Ethernet connection (RJ45);
this jack is used to connect the MicroLink 56k Fun LAN to your computer
or router with the network cable provided.
ć
LED (bottom left): this is lit when the MicroLink 56k Fun LAN is con-
nected to the computer or router.
ć LED (bottom right): blinks during data transmission.
b
Line: telephone jack (RJ11);
here is where you connect the MicroLink 56k Fun LAN to your telephone
outlet using the telephone cable provided.
2.3 Connecting the modem to a single PC
You have chosen to connect one PC to the Internet. This is how you should
proceed:
b “Connecting the MicroLink 56k Fun LAN to one PC” on page 9
b
“Installing and configuring the Internet access software” on page 10
under your operating system
2.3.1 Connecting the MicroLink 56k Fun LAN to one PC
To connect the MicroLink 56k Fun LAN to a single PC, follow these steps:
ቢ Connect the MicroLink 56k Fun LAN to your computer using the network
cable.
ባ Connect your MicroLink 56k Fun LAN to the matching connection jack of
the telephone line using the telephone cable provided.
MicroLink 56k
Fun LAN