Devolo MicroLink ADSL Fun USB - Manual (Page 14)

Installation
|
| devolo MicroLink ADSL Fun USB |
14
EN
2.3.5 Installation under Windows XP
When installing software under the Windows XP, messages may appear,
respective of the operating system, regarding driver and software signatures
(Windows logo testing). Simply continue the installation regardless, and con-
firm any and all such prompts by clicking Yes or Continue Installation.
ቢ Start your computer.
ባ Insert the supplied devolo product CD into your CD-ROM drive.
ቤ Connect your ADSL modem to your computer via the supplied USB cable.
ብ Connect your ADSL modem to the ADSL connection via the supplied
ADSL cable.
ቦ Windows starts the hardware wizard and reports that new hardware has
been detected.
ቧ In the following dialog box, activate the 'Install the software automati-
cally (Recommended)' option. Click on Next to start the driver installa-
tion.
ቨ Confirm the first part of the driver installation by clicking Finish.
ቩ Windows starts the hardware wizard and reports that new hardware has
been detected.
ቪ In the following dialog box, activate the 'Install the software automati-
cally (Recommended)' option. Confirm with Next
ቫ Now set up your Internet access by selecting the 'Country' in which you
are and your 'Internet service provider'.
If you use an Internet provider who is not listed, activate the 'Configure the
ADSL connection manually' option and enter the 'Protocol', 'Encapsulation',
'VPI' and 'VCI' settings manually. You will get the necessary information from
your provider.
ቭ Confirm your settings with OK.
The driver installation continues.
ቮ Finally, click on Finish to exit the installation.