Devolo MicroLink ADSL Fun USB - Manual (Page 12)

Installation
|
| devolo MicroLink ADSL Fun USB |
12
EN
ብ Connect your ADSL modem to the ADSL connection via the supplied
ADSL cable.
ቦ Windows starts the hardware wizard and provides you with two different
options for searching for drivers. Select the 'Automatic search for a better
driver (Recommended)' option, and click on Next.
ቧ The driver installation continues. Confirm the first part of the driver
installation by clicking Finish.
ቨ Windows starts the hardware wizard and provides you with two different
options for searching for drivers. Select the 'Automatic search for a better
driver (Recommended)' option, and click on Next.
ቩ Now set up your Internet access by selecting the 'Country' in which you
are and your 'Internet service provider'.
If you use an Internet provider who is not listed, activate the 'Configure the
ADSL connection manually' option and enter the 'Protocol', 'Encapsulation',
'VPI' and 'VCI' settings manually. You will get the necessary information from
your provider.
ቪ Confirm your settings with OK. The driver installation continues.
ቫ Click on Finish to exit the installation.
ቭ When Windows prompts you to reboot your system, click Yes.
ቮ After rebooting Windows may also ask about your location. If so, enter
your area code number (prefix number) and then click Close.
2.3.4 Installation under Windows 2000
When installing software under the Windows 2000, messages may appear,
respective of the operating system, regarding driver and software signatures
(Windows logo testing). Simply continue the installation regardless, and con-
firm any and all such prompts by clicking Yes or Continue Installation.
ቢ Start your computer.
ባ Insert the supplied devolo product CD into your CD-ROM drive.
ቤ Connect your ADSL modem to your computer via the supplied USB cable.
ብ Connect your ADSL modem to the ADSL connection via the supplied
ADSL cable.