Devolo MicroLink ADSL Fun USB - Manual (Page 11)

|
Installation 11
| devolo MicroLink ADSL Fun USB |
EN
ቪ Windows starts the hardware wizard and reports that new hardware has
been detected. Confirm this message with Next.
ቫ Windows provides you with two different options for searching for driv-
ers. Select the 'Search for the best driver for your device (Recommended)'
option and click Next.
ቭ The suitable driver can be found on the devolo product CD. Activate the
'CD-ROM drive' option and deactivate all other boxes. Confirm with
Next.
ቮ Windows provides you with two different options for searching for driv-
ers. Select ' The updated driver (Recommended) MicroLink ADSL Fun USB
(Annex B)' option. Confirm with Next (2x).
ቯ Now set up your Internet access by selecting the 'Country' in which you
are and your 'Internet service provider'.
If you use an Internet provider who is not listed, activate the 'Configure the
ADSL connection manually' option and enter the 'Protocol', 'Encapsulation',
'VPI' and 'VCI' settings manually. You will get the necessary information from
your provider.
ተ Confirm your settings with OK. The driver installation continues.
You may be prompted to insert the Windows 98 CD. If prompted to, insert this
CD into your CD drive and confirm with OK.
Windows may announces a 'Version Conflict' of a file. Please respond to the
question if you want to keep this file with Yes.
ቱ Click on Finish to exit the installation.
ቲ When Windows prompts you to reboot your system, click Yes.
ታ After rebooting Windows may also ask about your location. If so, enter
your area code number (prefix number) and then click Close.
2.3.3 Installation under Windows Me
ቢ Start your computer.
ባ Insert the supplied devolo product CD into your CD-ROM drive.
ቤ Connect your ADSL modem to your computer via the supplied USB cable.