Devolo dLAN TV Sat 2400-CI+ - Manual (Page 35)

34 TV and radio programme
devolo dLAN TV Sat 2400-CI+
b You enter the symbol rate in the Symbol rate field
using number keys 0 to 9.
b You select the network number from the selection
list in the Network search field.
b Channel scanning:
ć Yes: after one transponder has been set, the
parameters of other transponders are
retrieved from the NIT table (Network Infor-
mation Table) and the other transponders set.
Once the transponder frequency has been en-
tered, the signal level and quality are dis-
played on the bars at the bottom of the
screen. The Signal quality bar shows the re-
ception quality. The Signal level bar shows
the strength of the satellite signal.
You confirm all entries with OK.
Fast Channel Scan
You select Fast Channel Scan in the Installation
menu and confirm with OK. In this menu, you select
the satellites to be scanned.
You can set the satellite parameters to suit using the
navigation buttons:
b Select the GREEN button to scan the selected
satellite.
b Select the BLUE button to display the Tran-
sponder list.
b Press OK to scan all satellites.