Devolo dLAN 200 AV Wireless N - Manual (Page 37)

36 Network configuration
devolo dLAN 200 AV Wireless N
WPS via PBC (Push Button Configuration):
ቢ Start the encryption process on the
dLAN 200 AV Wireless N
ć either by pressing the WPS button on the
front panel of the device or
ć by pressing the Start setup button on the
user interface under WLAN configuration
ı
Wi-Fi Protected Setup (WPS).
ባ Then press either the WPS key of the WLAN client
you are adding or the WPS button on the configu-
ration interface. Now the devices exchange their
encryption keys and establish a secure WLAN con-
nection. The WLAN LED on the front panel indi-
cates the synchronisation process by flashing.
WPS via PIN:
ቢ To interconnect WLAN clients securely in your
wireless network via PIN variants, enter an indi-
vidualised key in the configuration interface under
WLAN configuration
ı Wi-Fi Protected Setup
(WPS) ı PIN and start the encryption process by
pressing the Start setup button.
ባ Open the configuration interface of the WLAN cli-
ent to be added and transmit the PIN selected on
the dLAN 200 AV Wireless N. Confirm the encryp-
tion process as described there. Now the devices
exchange their encryption keys and establish a
secure WLAN connection. The WLAN LED on the
front panel indicates the synchronisation process
by flashing.