Devolo dLAN 200 AV Wireless N - Manual (Page 15)

14 Initial use
devolo dLAN 200 AV Wireless N
WPS is one of the encryption standards de-
veloped by the Wi-Fi Alliance for increasing
security in a WLAN home network. The ob-
jective of WPS is to make it easier to add de-
vices to an existing network. For more
detailed information, refer to Chapter 4.5.4
Wi-Fi Protected Setup (WPS).
dLAN
Via the dLAN encryption button, you secure your dLAN
network at the touch of a button:
b To encrypt your dLAN 200 AV network individu-
ally, press each encryption button on the
connected devices for approx. 1 second –
within 2 minutes.
b To remove a dLAN 200 AV device from your net-
work, press the encryption button of the corre-
sponding device for at least 10 seconds.
For more details on dLAN encryption, refer to
Chapter 5 Security in the dLAN.
Reset
The Reset button (on the side of the housing) has two
different functions:
b The device restarts if you press the Reset button
for less than 10 seconds.
b To change the configuration of the
dLAN 200 AV Wireless N back to the factory
defaults, press the Reset button for more than
10 seconds. Keep in mind that all settings that
have already been configured will be lost!
The reset button can be pressed using the tip
of a ball-point pen.
3.3.3 Network jacks
The three LAN ports can be used to connect computers
or other network devices to the