Devolo dLAN 200 AV Wireless N - Manual (Page 16)

Initial use 15
devolo dLAN 200 AV Wireless N
dLAN 200 AV Wireless N via commercially available
network cables.
3.3.4 WLAN antennas
The internal WLAN antennas are for connecting to oth-
er network devices wirelessly.
3.4 Connecting the
dLAN 200 AV Wireless N
This section describes how to connect your
dLAN 200 AV Wireless N to a computer or other net-
work device.
ቢ Use a network cable to connect the
dLAN 200 AV Wireless N to the network port of
your running computer or other network device.
ባ Plug the dLAN 200 AV Wireless N into a wall
socket.
The outlet must be within reach of the
connected network device. The
dLAN 200 AV Wireless N and the net-
work device must be easily accessible.
In order to switch the
dLAN 200 AV Wireless N off and dis-
connect it from the power supply, pull
the plug out of the power outlet.
ቤ Once you have connected at least two dLAN 200
AV adapters as described above, your dLAN 200
AV network has been set up. To secure your net-
work individually, continue with the configura-
tion. To do so, read further in Chapter 4 Network
configuration and 5 Security in the dLAN.
3.5 Software installation
3.5.1 Software for Windows
Use the installation wizard to install the devolo
software for using the adapter with the Windows
operating system:
b devolo dLAN Cockpit finds all reachable dLAN
adapters in your dLAN 200 AV network, displays
information about these devices and encrypts your
dLAN 200 AV network individually.
b Configure your WLAN network via the built-in
configuration interface of your
dLAN 200 AV Wireless N.
To install the software, insert the included CD-ROM in
the CD drive of your computer. If autoplay is installed
on your computer, the installation will start automati-
cally. Otherwise, open the folder with the Windows Ex-
plorer by right-clicking on Start and selecting