Devolo dLAN 200 AVeasy User Manual
Page 17
|
Security in the dLAN
17
|
devolo dLAN 200 AVeasy
|
To integrate additional dLAN 200 AVeasy
adapters in your network, repeat the
above steps.
ቤ Excluding a dLAN 200 AVeasy from your network
To exclude a dLAN 200 AVeasy adapter from an existing network, press its
encryption button for at least ten seconds. The device will be assigned a
new randomly generated password and will thus no longer be able to access
the network. To integrate the adapter in a different dLAN 200 AVeasy net-
work, follow the steps described under
ቢ
or
ባ, depending on whether you
are setting up a new network or adding the adapter to an existing one.
3.2
dLAN 200 AV network encryption using the dLAN
Configuration Wizard
When using dLAN 200 AV adapters without encryption buttons, data encryption
can only be set up using the dLAN Configuration Wizard. Start by updating the
firmware (see 2.4.1'Firmware update') of the dLAN 200 AV adapters.
After successfully installing the devolo software, you can launch the dLAN Con-
figuration Wizard via the Start
̈
Programs
̈
devolo program group and the
Device
̈
Start dLAN Configuration Wizard of the devolo Informer.