Devolo dLAN 200 AVeasy - Manual (Page 12)

Initial use
|
| devolo dLAN 200 AVeasy |
12
2.3.1 Control lamps (LEDs
2.3.2 Connection
b Network connection
ć
This is the connection point on the dLAN 200 AVeasy for connecting it
to a computer or another network device with the network cable (inclu-
ded).
2.3.3 Encryption button
b
Data encryption at the touch of a button;
ć For more information on the functions of the encryption button, please
see the chapter 3.1 'dLAN 200 AV network encryption at the touch of a
button'.
Please note that all dLAN 200 AV devices to be connected to your network are
also connected to your household electrical wiring. A dLAN 200 AV device
switches to Standby mode after a short while if no active network device such
as a computer is connected to the network port. In Standby mode, the dLAN 200
AV device cannot be accessed via the power supply grid. As soon as the network
device (e.g. computer) connected to the network interface is switched on again,
your dLAN 200 AV device can also be reached again via the electrical wiring.
2.4 Connecting the dLAN 200 AVeasy
This section describes how to connect your dLAN 200 AVeasy to a computer or
other network device.
Power green Lit steady when dLAN 200 AVeasy is ready for operation;
flashes when dLAN 200 AVeasy is in standby mode.
dLAN green The network connection is suitable for HD video streaming;
flashes when data is being transmitted.
orange The network connection is suitable for SD video streaming
and online gaming; flashes when data is being transmitted.
red The network connection is suitable for simple data transfer
and Internet access; flashes when data is being transmitted.
Ethernet green A 100 Mbps or 10 Mbps connection to the Ethernet net-
work exists; flashes when data is being transmitted.