Dacor IF36BNDFSF - Manual (Page 2)

IF36 Panel Overlay Installation
Page 2
B
A
C
D D
D
Three Door Model Two Door Model
P
anel
S
PecIfIcatIonS
Front Panels
NOTE: Modification to the dimensions above may be required to allow for
door swing and other considerations depending on the location and type
of cabinet installation.
Backing Panel
(Thickness = 1/4”)
A* 17 7/8” (45.4 cm)
B 42” (106.7 cm)
C 23 13/16” (60.5 cm)
D 36 3/16” (91.9 cm)
Spacer Panel - Routed Area
(Thickness = 1/8”)
A* 17 5/8” (44.8 cm)
B 41 1/2” (105.4 cm)
C 23 5/16” (59.2 cm)
D 35 11/16” (90.6 cm)
Front Panel
(Thickness = 3/4”)
A* 18 1/8” (46.0 cm)
B 42 3/16” (107.2 cm)
C 24” (61.0 cm)
D 36 1/2” (92.7 cm)
* On three door models there are no
trim frames on the inner edges of
each door. The inner door surfaces
must be completely finished for a
refined look (see page 3). Stated
dimensions are to the finished edge.
d
oor
P
anel
W
eIght
S
PecIfIcatIonS
Model: IF36BNDFSF
Three Doors
Model: IF36INDFSF
Two Doors
Panel Maximum
Weight Specifications
1 15 lb. (7 kg)
2 30 lb. (14kg)
2
1 1
1 1
No Trim
Frame*
No Trim
Frame*
WARNING:
To prevent the unit from tipping
forward and to provide a stable
installation, the refrigerator must
be secured in place with an anti-tip
device.