Datatek IPv6 Transformer User Manual - Manual (Page 36)

S E C T I O N 8 W E B G U I S Y S T E M
36
SAVE
A domain must be entered before the information on this screen can be saved. Select the SAVE
button before proceeding to the remaining configuration screens, otherwise the information will
be lost. Furthermore, configuration on the General setup screen determines the availability of
some options on the other screens.
A reboot is required for any configuration changes made on the other screens to take effect. The GUI will
display instances when a reboot is required.
webGUI protocol
Select HTTP or HTTPS as the GUI protocol. HTTPS uses HTTP over SSL (Secure Socket
Layer) for security.
webGUI port
Enter a custom HTTP port number to use or leave blank to use the default port of 80 for HTTP
and 443 for HTTPS.
Time zone
Select the time zone the Transformer is in.
Time update interval
Enter how often the Transformer should use NTP (Network Time Protocol) to synchronize its
clock with a server in the network.
NTP time server
Enter the domain name of the NTP (Network Time Protocol) time server.