Daktronics Gen V Radio User Manual
Page 14
8
Setting Radio Channels
Typically all multiple controller systems will use Broadcast Group 1 Channel 1 for the first
controller in Broadcast Group 1 and Broadcast Group 2 Channel 1 for the first controller in
Broadcast Group 2. All other consoles in a group are added sequentially, using channels 2-8
for groups 1 and 3, and channels 2-4 for groups 2 and 4.
Display
Action
The LCD will toggle between
these 2 screens.
The LCD shows the current radio settings along with a prompt
to accept or modify these values.
If the radio settings are correct press
If these values are incorrect press
bottom left is shown, allowing edit of the channel or broadcast
group setting. Use the number keys to enter the desired
broadcast group and press
will move to the channel setting.
Edit the channel number to the desired value and press
to accept.
Broadcast
Group
Channel
Setting
Control Scoreboards
0
0
All Scoreboards
1
0
All in BCAST Group 1
1-8
Set to corresponding BCAST 1
Channel
2
0
All in BCAST Group 2
1-4
Set to Corresponding BCAST 2
Channel
3
0
All in BCAST Group 3
1-8
Set to corresponding BCAST 3
Channel
4
0
All in BCAST Group 4
1-4
Set to corresponding BCAST 4
Channel
ENTER TO ACCEPT
CLEAR TO MODI FY
BCAST GROUP 1*
RADI O CHAN 01
RADI O SETTI NGS
BCAST X CHAN YY