Daktronics Gen V Radio - Manual (Page 13)

Setting Radio Channels 7
Multiple Controller with Multiple Broadcast Groups
In a multiple controller system with multiple broadcast groups (Figure 5), there are many
consoles that control multiple scoreboards and/or scoreboard groups. The radio receiver inside
the scoreboard is set to broadcast group 1, 2, 3, or 4. By changing the console settings to the
specific broadcast group address, a single console can control all scoreboards or specific groups
of scoreboards. One example of this scenario is split court operation in basketball installations,
where scoreboards are used to score multiple games at once, but can be grouped together to
show one game if necessary. Refer to Drawing A-202943 as an example.
Figure 5: Multiple Broadcast Group
BCAST 1, CHANNEL #1 BCAST 1, CHANNEL #2
BCAST 1, CHANNEL 01 BCAST 1, CHANNEL 02
BCAST 2, CHANNEL #1 BCAST 2, CHANNEL #2
BCAST 2, CHANNEL 01
BCAST 1, CHANNEL 00
BCAST 2, CHANNEL 02
BCAST 2, CHANNEL 00
BCAST 0, CHANNEL 00
to control all at once
Or
BCAST 1-2,
CHANNEL 01-02
to control a specific
scoreboard/group