Daktronics All Sport 1600 Series - Manual (Page 39)

Baseball Operation 31
Section 9: Baseball Operation
Sport Insert: LL-2500 (Code 03) (Code 23) (Code 80) (Code 83) (Code 87)
The sport insert drawings are located in Appendix B. The block diagram drawings are located in
Appendix A.
Reference Drawings:
Insert; LL-2500 A/S 1600, Baseball .................................................................... Drawing A-139491
System Riser Diagram; Indoor/Outdoor A/S 1600 .............................................. Drawing A-139544
Refer to the information in Section 2 to start up the console and use the sport insert.
If an insert is lost or damaged, a copy of the insert drawing can be used until a replacement arrives.
If the code number for a scoreboard is unknown, refer to Appendix C. If the model number of a
scoreboard is unknown, refer to the documentation provided with the scoreboard.
9.1 Baseball Keys
Out +1, Inning +1
The and keys are used to increment their respective totals.
Display Action
NN = current setting
Press or to increment their
respective totals.
To change values, first press then +1> or to display the current setting. Enter the
correct number and press .
Ball, Strike, Clear Ball/Strike
The and keys increment the ball and strike digits. Pressing the
key clears the digits.
Note: If the ball count value is 4 when is pressed, the value is blanked out. If the
strike count value is 3 when is pressed, the value is blanked out
.
Display Action
N = current setting
Press the or to increment the ball
and strike digits.
Press the key to clear the digits
to zero.
Hit, Error
The and keys are used to turn on the Hit or Error indicator or digits. In the
table that follows, is used as an example.
I NNI NG-+1
NN
BALL:+1
N