Daktronics All Sport 1600 Series - Manual (Page 32)

24 Segment Timer
Display Action
* = current setting
The console will prompt for the auto stop at last segment
setting.
Press <1> to set the console to stop when the last segment
has been completed.
Press <2> to set the console to start over at the first segment
when the last segment is completed
Warning Time
Display Action
MM:SS = minutes, seconds
Press >, enter the time in minutes and
seconds and press .
Enter 00:00 for no warning time (default).
When the warning time is reached, the segment number
flashes until the main clock reaches zero.
Current Segment +1
Press to increment the segment number.
Reset Current Segment
Press to reset the segment time to the value specified by the
current segment. The segment number will remain at the current value.
Edit Current Segment
Display Action
NN = current setting
Press then to
display the current segment for editing.
Enter the new value for the current segment number and press
.
Reset to First Segment
Press to reset the segment number and segment time to the values
saved as the first segment.
Note: The Reset to First Segment function is disabled while the clock is running.
STOP AT LAST SEG
1*YES 2-NO
WARNI NG TI ME
MM:SS*
CURRENT SEGMENT:
EDI T NN*