beautypg.com

Indoor radio server board, Signal termination between two displays, Primary mirror – Daktronics Venus 1500 Radio – Gen 2 User Manual

Page 22: Primary - mirror, 7 indoor radio server board, 8 signal termination between two displays

background image

2.7 Indoor Radio Server Board

Figure 20 is an example of the internal radio control board found in the indoor server. It has
several additional parts not found on the outdoor server or client radios, therefore the boards
are not interchangeable.



Figure 20: Indoor Server Radio Board



2.8 Signal Termination between Two Displays

Primary - Mirror

Figure 21: Quick-connect
between Displays

Most displays are shipped as either a single primary display or two
displays in a two-face primary–mirror configuration.

The primary-mirror (2V) quick-connect cable is used to terminate signal
between these two displays. The six-foot cable goes from the Signal
OUT (J34) on the primary display to Signal IN (J32) on the mirror
display as shown in Figure 21.





Installation Guidelines

20