Daktronics VIP-4060 - Manual (Page 5)

VIP-4060 Quick Guide 5 of 6
DD1733958 Rev 04
08 December 2014
201 Daktronics Dr. P.O. Box 5128 Brookings, SD 57006
tel: 800-325-8766 fax: 605-697-4700
www.daktronics.com
Configuring Video
1. Navigate to the Display Control tab and click the Display mode sub-tab.
2. Select a video signal (DVI, SDI, or VMax) from the Display mode drop-down list.
Refer to Figure 16.
3. Navigate to the Source & Target sub-tab and select Source to enter display area.
Note: Refer to the right side of the window for information about limits of the current
video source.
Display Adjustments
To adjust dimming, navigate to the Display mode sub-tab and choose an option from the
Dimming mode drop-down list. Refer to Figure 17.
• Auto - dimming values adjust according to data received from a light sensor.
• Manual - dimming values are set at a constant level using a slider bar.
• GPS - dimming values are based on either a GPS sensor or Configured GPS values.
• Ertd - dimming values are controlled via Enhanced Real Time Data (ERTD) scripts.
• VMax - dimming is controlled by a DMP-7000 or VIP-4400/4500.
To adjust gamma, navigate to the Configuration tab and click the Content sub-tab. Use the slider bar to select the
preferred Gamma value.
To adjust brightness, contrast, hue, and saturation, navigate to the Display tab and then to the Color Adjustments
sub-tab. Use the respective slider bars to select the preferred values for each adjustment.
Configuring Backup
To clone configuration files and the translation table:
1. Click the Backup Display Configuration icon. Refer to Figure 18.
2. Choose a location to save the file.
3. Type a name for the file in the File Name text box.
4. Click Save.
To load a stored configuration:
1. Click the Load Display Configuration Backup icon. Refer to Figure 18.
2. Navigate to the file’s storage location.
3. Select the file and click Open to reload the configuration.
Figure 16: Video
Signal Mode
Figure 17: Dimming
Mode Adjustment
Figure 18: Display Configuration Icons
Backup display configuration
Load display configuration backup