Daktronics VIP-4060 - Manual (Page 4)

VIP-4060 Quick Guide 4 of 6
DD1733958 Rev 04
08 December 2014
201 Daktronics Dr. P.O. Box 5128 Brookings, SD 57006
tel: 800-325-8766 fax: 605-697-4700
www.daktronics.com
Installing Silverlight ® Application
If the Silverlight ® application is not installed on the host machine, the
Install Microsoft ® Silverlight ® button will appear. Refer to Figure 13.
1. Click Install Microsoft ® Silverlight ® to open the
download window.
2. Click Run and then Install Now in the dialog boxes to
begin installation.
3. Click Close in the final dialog box to complete installation.
Logging In to VIP-4060 System
1. Type Dak into the Username text box. Refer to Figure 14.
2. Click Log In. No password is required.
These are the factory-configured login credentials. Daktronics strongly
recommends adding a password after initial configuration.
Once a password is configured, the new password needs to be entered
into the Password text box during login.
Note: Do not lose the password; losing it requires a service call.
System Configuration
Configuring Display
The translation table defines the internal types of display components as well as the internal
wiring. This includes basic identifying information such as the table’s author, ED number,
contract, title, and task. Refer to Figure 15.
Contact Daktronics Technical Services before uploading a translation table.
To upload a translation table:
1. Navigate to the Configuration tab and click the Display sub-tab.
2. Click Upload under Translation Table.
3. Browse to the translation table provided by the display installer.
4. Click Open to upload the file.
Note: Display output may be temporarily out of sync while the translation table is applied.
Figure 13: Silverlight ® Installation Button
Figure 14: System Login Prompt
Figure 15: Display
Translation Table