Daktronics TN-2501 Tuff Sport Indoor LED Tennis Scoreboard - Manual (Page 11)

Mechanical Installation 5
2.3 Multi-Court Scoreboard Mounting
Due to the variety of wall materials used in sports facilities, Daktronics cannot anticipate a
user’s individual installation needs or provide mounting hardware suitable for every
installation. Choose a method of installation that will safely support the scoreboard weight.
1. Use eyebolts to lift a scoreboard from the bottom
row into position on the wall.
2. Ensure the scoreboard is level, and secure it to the
wall by attaching 1 /
2
" mounting hardware
through all obround holes on the bottom rear
flange of the cabinet (Figure 5).
3. Two mounting brackets must be used inside the
top scoreboard channel as shown in Figure 7.
a. Line up the outer hole on the bracket with the
mounting hole in the top rear flange.
b. Using the bracket as a template, drill another
hole through the top rear flange.
c. Secure the top rear flange and bracket to the
wall with 1 /
2
" hardware through the existing
and drilled holes.
d. Repeat steps a-c for the other mounting
bracket.
4. Repeat steps 1-3 for all other scoreboards in the
bottom row.
Note: Before attaching additional rows of
scoreboards, it will be easier to make power and
signal connections between each scoreboard in
the bottom row. Refer to Section 4 for more
information on power/signal installation.
5. Remove the eyebolts from the bottom row of
scoreboards, and use them to lift the next row in
place. The bottom rear flanges of upper rows will
not be mounted to the wall; instead, they rest
inside the mounting brackets of the scoreboards
in the row below. Refer to Figure 8.
6. Secure the upper-most row of scoreboards to the
wall by attaching 1 /
2
" mounting hardware
through all obround holes on the top rear flange
of the cabinet (similar to the bottom flange
attachment shown in Figure 5).
Figure 6: Wall Mounting without Bracket
Figure 7: Wall Mounting with Bracket
Figure 8: Upper Scoreboard Placement