Daktronics LED Aquatics/Track Displays SW-2000 Series 10 Numeric Digit - Manual (Page 13)

Mechanical Installation 7
Horizontal Wall Mounting, Indoors Only
Reference Drawings:
Strut Spacing, Horizontal Wall Mounting ......... Drawing A-129905
End Bracket Attachment, Horizontal Wall
Mounting ................................................... Drawing A-129906
Horizontal Wall Mounting, Final Steps ............. Drawing A-129907
Use this method when the overall display requires that digit modules be mounted side
by side.
1. Attach the mounting struts to the wall. Refer to Drawing A-130545 to
determine the strut length and the distance between the struts.
2. Attach the caption module to the digit module before attaching the digit
module to the wall. Note: Caption modules do not require extra strut length
when they are mounted at either top or bottom of the column.
3. Start with the left column of modules. Attach the end brackets to the right
end of all the modules in the left column. Next, attach brackets to the left
end of all the modules in the right column. (Refer to Drawing A-129906).
4. Attach the modules in the left column first:

Use 3 /
8
" bolts to attach the struts (Refer to Drawing A-129907).

Mount the lowest module first, and then add modules working
upward until the left column is complete.
5. Starting at the bottom, attach the modules in the right column. Join the left
and right columns using the end brackets:

Insert the screw heads on the end brackets into the keyholes on the
mating bracket and press down on the right side (Refer to Drawing
A-129907).

As the modules are joined, use 3 /
8
" bolts to attach the right end of
each module to the struts (Refer to Drawing A-129907).

Complete the lowest module first. Add any remaining modules,
working upward until the right column is completed.
Corner-Mounting Modules, Indoors Only
Reference Drawing:
Corner Mount ................................................... Drawing A-130508
If the display is to be mounted across the corner of adjoining walls, you may order
special corner-mounting brackets as an option. Drawing A-130508 shows the
procedure for this type of mounting.