Directed Electronics Model 690XV - Manual (Page 21)

18 © 2 0 0 3 d i r e c t e d e l e c t r o n i c s , i n c .
the ignition, are now bypassed.
➤ Continued pressing of will begin the Multi-Level
Security Arming cycle over again.
arming while driving
Your system can be armed while driving the vehicle. Simply press
on your transmitter for two seconds while the vehicle is
running or while the ignition is on. The siren will chirp once and
then once more to indicate that the ignition is on. The security
system will not respond to any input except the door triggers and
the Failsafe® Starter Kill (if installed) will not be activated. The
security system will disarm automatically whenever the ignition
is turned off. The siren will chirp twice and the LED will stop
flashing.
note: If programmed for the optional Vehicle Recovery
System (VRS®) feature, arming with the transmitter will
arm the VRS® feature. (See Vehicle Recovery System®
section of this guide.)
➜
note: Multi-Level Security Arming only applies to a sin-
gle arming cycle. Once the system is disarmed and then
re-armed, all the zones will be active again.