Directed Electronics Model 690XV User Manual

Page 15

Alarm Page

If the alarm system is triggered while armed, an Alarm Page will

be sent to the remote control. After receipt of an Alarm Page, the

LCD icons will display the alarm system status information and

the remote control will generate Alarm Page alerts.

An Alarm Page alert is a single beep or vibration from the remote

control every 60 seconds to alert the user that the alarm system

was triggered and will continue until the alarm page is cleared.

Page Recognition Mode

The remote control will leave a zone icon illuminated when it

has received a triggered response and will wait for you to recog-

nize the violation. Press any button on the remote control, the

LCD information and Alarm Page alerts will be cleared.

note: The remote control buttons will not send a com-
mand to the system until the alarm page is cleared.

note: If the transmiter is paged with an Alarm Page and
the WarnAway

is triggered before the Alarm Page is

recieved the transmitter will report the WarnAway

only

until the system is disarmed.

note: When the system is in Valet mode, the remote con-
trol will show the lock (5) and unlock (6) icons, but will
not generate a command page.