Daktronics BB-2101 Tuff Sport Basketball LED Scoreboard - Manual (Page 7)

Introduction 1
Section 1: Introduction
This manual explains the installation and maintenance of Daktronics Tuff Sport ® Indoor Basketball
LED Scoreboards, Game/Shot Clocks, and Statistics Panels. For additional information regarding the
safety, installation, operation, or service of these displays, refer to the telephone numbers listed in
Section ‎5.8. This manual is not specific to a particular installation.
Important Safeguards:
 Please read and understand all instructions before beginning the installation process.
 Do not drop control equipment or allow it to get wet.
 Do not disassemble control equipment or electronic controls of the display; failure to
follow this safeguard will make the warranty null and void.
 Disconnect display power when not in use or when servicing.
 Disconnect display power before servicing power supplies to avoid electrical shock.
Power supplies run on high voltage and may cause physical injury if touched while
powered.
 Do not modify the scoreboard structure or attach any panels or coverings to the
scoreboard without the express written consent of Daktronics, Inc.
Project-specific information takes precedence over any other general information found in
this manual.
1.1 Scoreboard Controllers
Daktronics Tuff Sport scoreboards are designed for use with the All Sport ® 1600 and 5000
series control consoles, and certain models may also be controlled with the RC-100 handheld
controller. All controllers use keyboard overlays (sport inserts) to control numerous sports
and scoreboard models. Refer to the following manuals for operating instructions:
 All Sport 1600 Series Control Console Operation Manual (ED-12462)
 All Sport 5000 Series Control Console Operation Manual (ED-11976)
 Remote Control System RC-100 Operational Overview (ED-15133)
These control console manuals are available online at www.daktronics.com/manuals .