Daktronics WR-2101 Matside Jr. LED Wrestling Scoreboard - Manual (Page 13)

Reference Drawings:
Mechanical Spec, WR-2101-13 ............................................................. Drawing A-220834
Mechanical Spec, WR-2102-13 ............................................................. Drawing A-220815
Mechanical Spec, WR-2103-13 ............................................................. Drawing A-220856
Mechanical Spec, WR-2104, 2105, 2106 .............................................. Drawing A-220904
All Daktronics Matside Jr. wrestling scoreboards may be displayed on the floor on a table, or
mounted on an optional tripod. Use only the tripod (part number A-1580) and adapter (HS-
1306) supplied by Daktronics. Drawings A-220815, A-220834, A-220856, and A-220904 in
Appendix A show how to mount the display on a tripod. Locate the holes on the bottom of
the scoreboard and secure the display to the tripod adaptor using the hardware provided.
The single-sided wrestling scoreboard (WR-2101) may also be wall mounted (the two- and
three-sided scoreboards in this manual cannot). Refer to Drawing A-220834 for mounting
keyhole locations on the back of the display. Due to the variety of wall materials used in
sports facilities, Daktronics cannot anticipate a user‟s needs or provide mounting hardware
suitable for every installation. Mounting hardware may be purchased at a local hardware
store. Choose a method of installation that will safely support the weight of the display.
Note: Do not use the carrying handle to permanently suspend the display.
Reference Drawings:
Electrical/Signal Spec, WR-2101-13 ...................................................... Drawing A-220850
Electrical/Signal Spec, WR-2102-13 ...................................................... Drawing A-220821
Electrical/Signal Spec, WR-2103-13 ...................................................... Drawing A-220875
Electrical/Signal Spec, WR-2104, 2105, 2106 ....................................... Drawing A-220903
Electrical installation involves the routing of power and control signal wiring to the displays.
Control signal cable is not provided as part of this system; it can be purchased locally or from
Daktronics.
Refer to Drawings A-220850, A-220821, and A-220875 in Appendix A for detailed power and
signal connection diagrams for each wrestling scoreboard model.
Each display comes equipped with a 120V AC, three-prong plug. Install a grounded
receptacle near the equipment and make certain that the power cord can easily reach it.
The control console requires a 120 V AC receptacle and uses less than 1 A of power.
Displays operating on 230 V AC are also available, and they are shipped equipped with a
universal power plug.