Daktronics WR-2101 Matside Jr. LED Wrestling Scoreboard - Manual (Page 11)

The chart on the following pages details all of the mechanical specifications, circuit specifications and
power requirements for each display in this manual. Models are listed in alphanumeric order.
Notes:
1) All displays require a 120 V AC, 15 A circuit. Displays with a 230 V A C power
requirement are also available.
2) Signal wire must be minimum of 22 AWG with shield. Daktronics recommends W-1614.
Model Dimensions:
Height, Width, Depth Weight: Watts Amps
120 / 230 V AC Driver #
& Address
WR-2101 H 1'-9", W 2'-0", D 7"
(533 mm, 610 mm, 178 mm) 25 lb
(11 kg) 100 W 0.85 A / 0.4 A A1 104
WR-2102
H 1'-9", W 2'-0", D 7"
(533 mm, 610 mm, 178 mm) 30 lb
(14 kg) 100 W 0.85 A / 0.4 A A1 104
WR-2103 H 1'-10", W 2'-3", D 2'-1"
(559 mm, 679 mm, 635 mm) 45 lb
(20 kg) 100 W 0.85 A / 0.4 A A1 104
WR-2104 H 0'-9", W 2'-0", D 7"
(229 mm, 610 mm, 178 mm) 10 lb
(4.5 kg)
WR-2101, WR-2102, or
WR-2103 scoreboard
required to provide
operation of digits
Driver located
in WR-2101,
WR-2102, or
WR-2103
scoreboard
WR-2105 H 0'-9", W 2'-0", D 7"
(229 mm, 610 mm, 178 mm) 10 lb
(4.5 kg)
WR-2105 H 0'-10", W 2'-3", D 2'-1"
(254 mm, 679 mm, 635 mm) 20 lb
(9 kg)