Daktronics BB-2135 Backboard LED Light Strip - Manual (Page 7)

Introduction 1
Section 1: Introduction
This manual explains the installation and maintenance of Daktronics BB-2135 End-of-Period (EOP)
backboard LED light strips. For additional information regarding the safety, installation, operation, or
service of these displays, refer to the telephone numbers listed in Section 3.7. This manual is not
specific to a particular installation. Project-specific information takes precedence over any other
general information found in this manual.
IMPORTANT SAFEGUARDS:
 Please read and understand all instructions before beginning the installation process.
 Do not drop control equipment or allow it to get wet.
 Do not disassemble control equipment or electronic controls of the display; failure to
follow this safeguard will make the warranty null and void.
 Disconnect display power when not in use or when servicing.
 Disconnect display power before servicing power supplies to avoid electrical shock.
Power supplies run on high voltage and may cause physical injury if touched while
powered.
 Do not modify the scoreboard structure or attach any panels or coverings to the
scoreboard without the express written consent of Daktronics, Inc.
1.1 Specifications Label
Power specifications as well as serial and model number information can be found on an ID
label on the device, similar to the one shown in Figure 1.
Please have the assembly number, model number, and the date manufactured on hand when
calling Daktronics customer service to ensure the request is serviced as quickly as possible.
Knowing the facility name and/or job number will also be helpful.
Figure 1: Specifications Label