D.T. Systems Micro-iDT PLUS with SmartLED - Manual (Page 17)

17
MAINTENANCE
It is very important to periodically clean your Micro-
iDT™ PLUS Series systems for maximum
performance. Regular cleaning will also lengthen the
life of your unit.
• Clean the Micro-iDT™ PLUS Series collar box
with lukewarm water and a mild anti-bacterial soap.
• Take care to thoroughly clean the space between
the electrodes and the belt.
• The belt and buckle should be cleaned with water
and a mild soap then allowed to dry completely.
• Always allow the unit to completely dry before using.
NOTE
It is recommended that the collar unit be rinsed with fresh,
clean water after use in wet conditions, especially in salt
water.
To get the maximum performance and life out of your
rechargeable batteries:
• Remove the unit from the charger as soon as the
SmartLED turns green during a charging session.
• Do not charge your batteries for more than 12 hours
at a time.
• Fully charge and test your unit about once a month
when storing your unit for an extended period of
time.
• Do not store your unit in extremely hot or cold
conditions.
• Store your unit in a dry environment.