Delta Electronics Planar DC/DC Transformer RM8 - Manual (Page 2)

PLT2214-001 110uH Min. 250KHz 6 : 1 0.5 Max. 500Vdc 250Vdc -10 C to +55 C 10.3gr o o
78
Planar DC/DC Transformer
Features
Mechanical Dimension:
Unit: mm
Electrical Characteristics:
Features
Mechanical Dimension:
Unit: mm
The planar transformer is suitable for push pull converter's output X'FMR and it has a
winding for auxiliary feed to input side.
Schematic :
PRI
7
6
2
3
SEC
The planar transformer is suitable for forward DC/DC converter's transformer and used on VRM.
Schematic :
PRI
2
6
9
10 SEC
DELTA ELECTRONICS, INC.
(TAOYUAN PLANT CPBG) 252, SAN YING ROAD, KUEISAN INDUSTRIAL ZONE, TAOYUAN SHIEN, 333, TAIWAN, R.O.C.
TEL: 886-3-3591968; FAX: 886-3-3591991
http://www.deltaww.com
Power Capacity 70 to 130 W
Frequency Range : 10K~300KHz
RM8
Electrical Characteristics:
PLT2214-002 94.5uH Min. 70KHz 1 : 1 1 : 1 0.5 Max. 500Vdc 250Vdc -10 C to +55 C 14.3gr o o
TURN DIELECTRIC
INDUCTANCE OPERATING DUTY AMBIENT
PART NO. RATIO STRENGTH WEIGHT
CYCLE L (1-8) FREQUENCY TEMPERATURE
(1-8) TO (5-3) (1-8) TO (7-2) PRI TO SEC WDGS TO CORE
TRANSFORMER
TURN DIELECTRIC
INDUCTANCE OPERATING DUTY AMBIENT
PART NO. RATIO STRENGTH WEIGHT
CYCLE L (1-4) FREQUENCY TEMPERATURE
(1-4) TO (5-8) PRI TO SEC WDGS TO CORE
TRANSFORMER
8
5
4
1
8
1
7
3
4
5
10 1 9 8
3 2
6
5 4 7
13.5 Max.
2.4x0.8
2.7 0.5
7.2 0.5
3.6 0.5
25.0 Max.
2.4x0.4
20.8 0.5
3.0 0.5
4.96 0.5
4.6 0.5
9.2 0.5
19.0 0.5
20.6 0.5 25.0 Max.
0.58 0.2
0.8 0.7
0.7
1 2 3 4
8 7 6 5
10.0 Max.
2.5 0.5 2.4x0.48 0.7
6.1 0.5
13.0 0.5
25.0 Max.
3.5 0.5
12.0 0.5
19.45 0.5 23.0 Max.