Cybex 751T Treadmill - Manual (Page 9)

Cybex 751T Treadmill Owner’s Manual Cybex 751T Treadmill Owner’s Manual
PB 9
Safety
IMPORTANT: Read all instructions and warnings before using the treadmill.
Important Voltage Information
Before plugging the power cord into an electrical outlet, verify that the voltage requirements for the
site match the voltage of the treadmill that has been received. The power requirements for the Cybex
750T Treadmill include a grounded, dedicated circuit, rated for one of the following:
• 100 VAC, 50/60 Hz, 20A
• 115 VAC, 60 Hz, 20A
• 220 VAC, 60 Hz, 15A
• 230 VAC, 50 Hz, 15A
• 230 VAC, 50 Hz, 13A, UK
See the serial number decal for the exact voltage requirements of the treadmill.
WARNING: Serious injury or death can occur. To avoid injury or death the following
procedure must be followed. Do not attempt to use this unit with a voltage
adapter. Do not attempt to use this unit with an extension cord.
WARNING: Serious injury or death can occur. To avoid injury or death the following
procedure must be followed. Do not plug more than one unit into a single
circuit.
Grounding Instructions
This treadmill must be grounded. If it should malfunction or break down, grounding provides a path of
least resistance for electric current to reduce the risk of electric shock. This product is equipped with
a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged
into an appropriate outlet that is properly installed and grounded in accordance with all local codes
and ordinances.
DANGER: Death or serious injury can occur. To avoid death or injury the following
procedure must be followed. Improper connection of the equipment-
grounding conductor can result in a risk of electric shock. Check with a
qualified electrician or service provider if there is doubt as to whether the
treadmill is properly grounded. Seek a qualified electrician to perform any
modifications to the cord or plug. Cybex is not responsible for injuries or
damages as a result of cord or plug modification.