Csafe ports – Cybex 751T Treadmill User Manual
Page 16
Cybex 751T Treadmill Owner’s Manual
16
The e-stop key can be removed to help prevent unauthorized use. Refer to the Stopping the Treadmill
section in the Operation chapter for more information about the e-stop key.
When not in use store the e-stop clip on the storage tab located on the lower cover. See Figure 3.
Figure 3
Clip
E-Stop
Storage Tab
Lower Cover
CSAFE Ports
The 750T Treadmill has two CSAFE ports, one in the console for CSAFE devices that need access
there, and one under the base of the unit for running a network connection.
The CSAFE standard defines a communication protocol and low-voltage DC power source specific
to the Fitness Equipment Industry. These RJ-45 phone jacks are provided for use ONLY within the
CSAFE protocol. For more information on the CSAFE standard, visit
. Not every connection carries both the communication and power capability.
The console CSAFE port inside the console contains the full implementation, with both network
communications and a standard CSAFE voltage (minimum 8.0 VDC) power source. The base CSAFE
port is accessible under the base of the treadmill and is for network communications only and does
not contain the DC power source. See Figures 4 and 5.
Console CSAFE Port Location
CSAFE Port
(Lower Socket)
Figure 4