Cybex 751T Treadmill - Manual (Page 38)

Cybex 751T Treadmill Owner’s Manual
38
Stopping the Treadmill
Press Stop once to end the workout session and start the Workout Review. The treadmill will perform
a controlled belt stop and bring the incline to 0%. The Text Area will be displaying accumulated data
or the results of the Fitness Test for the duration configured in Setup for Review Time (default is 20
seconds.) Press Stop again to exit to Dormant.
The function of the immobilization method: The purpose of immobilizing the treadmill is to
prevent unauthorized use. This can be accomplished by removing the e-stop key from the treadmill,
un-clipping it from the cord and putting it in a non-accessible place. See Figure 2. Immobilization
can also be enabled using the LOCK code. Either temporarily by pressing LOCK during review and
entering the correct PIN number, or permanently by enabling the LOCK feature in SETUP mode. See
the Setup chapter.
STEPS DISTANCE CALORIES CAL / HR BPM PACE TIME METs
COOL
INCLINE
END
PAUSE
SCAN
SHIFT
DOWN
FIT TEST
MANUAL
PROGRAMS
3 1 2
WEIGHT
CLEAR ALT
LEVEL
7
4
SPEED
ENTER
9
0
8
5 6
TIME SAVE
FAN OFF
FAN LO
FAN HI
START
QUICK
Figure 2
The emergency dismount:
Follow the steps listed below if you experience pain, feel faint or need to
stop your treadmill in an emergency situation:
1. Grip handrails for support.
2. Step onto the top steps.
3. Pull the e-stop key off the console.
The function of the emergency stop: The e-stop key functions as the emergency stop. In an
emergency situation, remove the e-stop key from the treadmill and the running belt will come to a
stop. See Figure 3.
Figure 3