Cybex 525T Treadmill - Manual (Page 64)

64
Cybex Owner’s Manual
Service Wheel (optional)
A service wheel lever is located at the rear end of the unit. This lever will engage a wheel and elevate
the rear end of the unit. The treadmill can then be easliy moved for cleaning or servicing.
WARNING: Shock and electrocution hazard.
• Unplug unit and let sit 10 minutes before cleaning or performing maintenance.
• Electrical charge can remain in unit after unplugging.
• Keep water and liquids away from electrical parts.
Engage service wheel
1. Unplug power cord from power outlet.
2. Grasp the service wheel lever and slide to the right and down to lock in place.
1 Service wheel lever
2 Frame
The service wheel will lower and raise the rear foot off the floor.
1 Service wheel
2 Rear foot
3 Floor
4 Service wheel lever
3. Move treadmill as needed.