Cybex 16121 Plate Loaded Smith Press - Manual (Page 10)

10
Cybex Owner’s Manual
Move to desired location
WARNING: Serious injury or death can result if the Smith Press is not removed from
the pallet correctly. Use a minimum of three people when preforming this
procedure.
1. Keep all shipping packages near area of installation.
2. Remove foam and shrink wrap securing weight bar to frame.
3. Remove the four Button Head Socket Cap Screws (BHSCS) and locknuts from the shipping
brackets securing the frame halves together using a 7/32” Allen wrench and 9/16” wrench. DO
NOT discard the BHSCS or locknuts.
4. Remove the four bolts securing the frame to the pallet using a 9/16” wrench.
Assemble frame
1. Hold frames in an upright position with the aid of assistants.
2. Place rubber feet on each foot of the frame.
3. Align front frame mount in place.
Front Frame Mount
BHSCS
(Qty of 2 each side)
Locknut (Qty of 2 each side)
4. Secure front frame in place with the four BHSCS and locknuts removed above.
5. Place back frame mount in position. Secure back frame mount to frame with the four BHSCS
and locknuts from the shipping package using a 7/32” Allen wrench and 9/16” wrench.
Back Frame Mount
Locknut (Qty of 2 each side)
BHSCS (Qty of 2
both sides)
Locknut