beautypg.com

Dodge 2008 Ram Pickup 1500 User Manual

Page 161

background image

For optimal training, point the battery end of the hand-
held transmitter away from the HomeLink

௡.

3. Simultaneously, press and hold both the chosen
HomeLink

௡button and the hand-held transmitter button

until the indicator(s) change from a slow to a rapid flash
rate.

Then release both the HomeLink

௡ and hand-held trans-

mitter buttons.

It may take up to 30 seconds, or longer in rare cases. The
garage door may open & close while you train.

If the signal is too weak to train, replace the battery in the
original hand-held transmitter.

NOTE:

Some gate operators and garage door openers

may require you to replace Step #3 with procedures
noted in the “Gate Operator/Canadian Programming”
section.

4. Press and hold the just-trained HomeLink

௡ button. If

the indicator(s) blink rapidly for two seconds and then
remains constant, continue with the next section: Pro-
gramming A Rolling Code System.

NOTE:

After training a HomeLink

௡ channel, if the

garage door does not operate with HomeLink

௡ and the

garage door opener was manufactured after 1995, the
garage door opener may have rolling code. If so, proceed
to the heading, “Programming A Rolling Code System.”

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

159

3