Danby SPAC8499 - Manual (Page 30)

14
Fan Operating Instructions
1) Press the I/O (on/off) key pad to switch on
the unit.
2) Press the MODE key until the word FAN is
displayed in the LCD window. Fig. 25. Each
depression of the MODE key will advance to a
different mode setting (Cool-Dry-Heat-Fan). No
indicator mode light is visible during operation of
the FAN mode (this is normal).
3) Press the FAN key to select the desired FAN
SPEED setting. Fig. 26. Your selection will be
displayed in the LCD window. Each depression
of the fan key will advance to a different speed
(Low-Med-High).
4) Press the SWING key to activate the automatic
air swing (oscillating) feature (the air swing
symbol will appear in the LCD window). Fig. 27.
To deactivate the air swing feature, press the
SWING key again.
5) To adjust “air flow” direction, (up / down only)
adjust any one of the Horizontal Louver Blades
(excluding the top and bottom louver) and the
remaining louvers will automatically adjust to the
same position. Fig. 28.
Water Full
Cool/Heat/Dry
I/O MODE
SWING TIMER
CLOCK
FAN
MODE FAN
FAN SPEED HIGH
ON
OFF
TEMP./CLOCK
ADJ.
Fig. 25
No Light Fan Mode
Water Full
Cool/Heat/Dry
I/O MODE
SWING
TIMER
CLOCK
FAN
MODE FAN
FAN SPEED HIGH
ON
OFF
TEMP./CLOCK
ADJ.
Fig. 26
Water Full
Cool/Heat/Dry
I/O MODE
SWING
TIMER
CLOCK
FAN
MODE FAN
FAN SPEED HIGH
SWING
ON
OFF
TEMP./CLOCK
ADJ.
Fig. 27
Fan Speed
R
Water Full I/O MODE TIMER SWING TEMP. CLOCK
FAN Cool/Heat/Dry
Fig. 28
Air Swing