Cybex 11040 Eagle Leg Press - Manual (Page 8)

8
Cybex Owner’s Manual
Assembly
Machine Specifications
Total Weight and Size: Eagle 11040 Leg Press
Weight Machine Dimensions at Rest Machine Dimensions at Use
1031 lbs 42” W x 68” L x 75” H 42” W x 95” L x 75” H
467.65 kg 106.68 cm W x 172.72 cm L x 190.5 H 106.68 cm W x 241.3 cm L x 190.5 H
The dimensions stated in the installation instructions are the recommended minimum dimensions as
set forth by the manufacturer. The actual area for access and passage shall be the responsibility of
the facility and should take into account any required local codes or regulations.
Tools Required
• 7/32” Allen wrench
• 3/4” Allen wrench
• 9/16” Wrench
• External snap ring pliers
• Phillips screwdriver
• Medium weight automotive engine oil
• Torque Wrench
Assembly Procedure
Two people will be required for this procedure.
Read and understand all instructions thoroughly before assembling this unit. Check all items
carefully. If there is damage, see the Customer Service section of this manual for proper procedure to
return, replace, or reorder parts.
It is the responsibility of the facility owner/owner of the equipment to ensure that there is appropriate
clearance around each machine to allow for safe use and passage.
Verify parts list shown below
Qty Part Number Description Diagram
5 11090-392 Foot pad