Cybex 18080 Bravo Pro - Manual (Page 15)

15
Cybex Owner’s Manual
Cable routing
1. Verify cable is routed through top of pulley bracket and then route cable end to top weight
connector.
2. Pull cable tight and secure in place with spiral pin using a 3/16” pin punch and a hammer.
4
3
1
2
5
Description
1 Pulley Bracket
2 Cable
3 Top Weight Connector
4 Roll Pin
5 Weight Selector Pin
Cable
Routing
Pulley
bracket
connects
to top
weight
connector
3. Place weight stack pin in each plate to verify proper installation.
4. Lift top weight up and down simulating normal operation (without selecting any resistance).
5. Verify that the cable is moving smoothly and is routed straight from the pulley bracket to the
top of the weight plate connector.