Cybex 18080 Bravo Pro - Manual (Page 11)

11
Cybex Owner’s Manual
Move to desired location
WARNING: Remove from pallet:
Serious injury or death can result if the Bravo Pro is not removed from the pallet
correctly. Use a minimum of three people when preforming this procedure.
1. Keep all shipping packages near area of installation.
2. Remove foam and shrink wrap securing cross tube and support.
3. Remove front and back panel by lifting up and out.
4. Remove the lag bolts securing the frame and weight packs to the pallet using a 9/16” wrench.
Assemble Frame
Remove shipping support tube
1. Remove the Button Head Socket Cap Screws (BHSCS) and washers from the shipping
support tube using a 7/32” Allen wrench. Discard shipping support tube and washers.
1
3
2
4
5
6
Description
1 Shipping Support Tube
2 BHSCS .357-16 X 1.25
3 Washer
4 Loctite #242
5 Detent Post
6 Mounting Plate
2. Apply two drops of loctite to the BHSCS and the threaded hole of the detent post.
3. Secure the detent post to the mounting plate with the BHSCS.
4. Repeat for opposite side.